1st lesson free
Fabio's profile, diploma and contact details have been verified by our experts
Fabio
- Rate UGX 111,567
- Response 24h
-
Students7
Number of students Fabio has accompanied since arriving at Superprof
Number of students Fabio has accompanied since arriving at Superprof
UGX 111,567/hr
Contact
1st lesson free
- Engineering
Master Your Needs with Expert Guidance – Engineer with 15+ Years of Experience in Teaching Theory and Practice
- Engineering
Lesson location
Recommended
Fabio is a respected member of our tutor community. He is highly recommended for his commitment and the quality of his lessons. An excellent choice to progress with confidence.
About Fabio
I am an experienced engineer with over 15 years of expertise in teaching, mentoring, and preparing students for school and university exams, university entrance tests, and public or professional competitions. My journey began in 2011 after graduating in Mechanical Engineering, and it has since been strengthened through hundreds of hours of both individual and group lessons, working with up to six students per session. Over the years, I have developed a highly personalised teaching method, tailored to the specific needs of those facing selective assessments—whether a university entrance test (such as TOLC, Medicine, or Engineering), a complex university exam, or a public competition. During my Master’s in Mechanical Engineering, specialising in Energy Conversion Systems, I continued to cultivate my passion for teaching. This passion also led me to China, where I taught Aerodynamics and Thermodynamics to undergraduate Automotive Engineering students at Hubei Automotive University in Shiyan. There, I conducted technical sessions with more than 150 students, covering advanced topics such as Propulsion Systems, Vehicle Performance, and Computational Fluid Dynamics. Today, I put all this experience at the service of those who wish to successfully pass exams, tests, and competitions. My lessons are conducted online and are based on a concrete, strategic approach: starting from an analysis of the syllabus and requirements, we build together a tailored learning path that integrates theory, guided exercises, simulations, and time-management strategies. Whether you are a high school student, a university student, or an adult looking to upskill or pass a competition, we will work together to turn your preparation into real results.
See more
About the lesson
- Secondary
- Tertiary
- Adult Education
- +6
levels :
Secondary
Tertiary
Adult Education
Masters
Diploma
PhD (Doctor of Philosophy)
Post-Graduate Diploma in Legal Practice
MBA
Early childhood education
- English
- Spanish
- Italian
All languages in which the lesson is available :
English
Spanish
Italian
I offer ONLINE SESSIONS tailored to individual goals and learning styles. Areas of Expertise Physics Mathematics Mechanical Engineering Thermodynamics Fluid Mechanics Heat Transfer Energy Conversion Systems Teaching Techniques & Methodology My approach is highly personalised: I begin with an initial assessment to identify strengths, gaps, and objectives. From there, I design a structured learning plan combining theory, problem-solving, and active discussion. Lessons are interactive, using digital whiteboards, shared materials, and real-world examples. I place strong emphasis on clarity, engagement, and developing both problem-solving skills and exam strategies. Lesson Structure & Length A typical lesson lasts 60–90 minutes, depending on the student’s needs. Sessions usually include: Step-by-step explanation of theory Practical exercises closely aligned with exams/tests Active student involvement through questions and problem reflection Support with assignments, quizzes, or problem sets Exam simulations and strategies for time management Visual aids (schemes, diagrams, PowerPoint slides) for deeper understanding Qualifications & Experience Master’s Degree in Mechanical Engineering, specialisation in Energy Conversion Systems 15+ years of tutoring experience (individual & group lessons, up to 6 students) Former lecturer in Aerodynamics and Thermodynamics at Hubei Automotive University (China), teaching advanced topics such as Propulsion Systems, Vehicle Performance, and Computational Fluid Dynamics to 150+ undergraduate students Extensive experience preparing students for university entrance tests (TOLC, Medicine, Engineering), school/university exams, and public competitions Who My Lessons Are For Middle & high school students (both general and technical tracks) University students in STEM, engineering, medical, and related faculties Adults preparing for public or professional competitions Candidates for university entrance exams and aptitude tests With patience, respect, and a results-oriented methodology, I help students not only understand theory but also develop the confidence and skills to succeed in exams, tests, and real-world applications.
See more
Recommendations
Recommendations come from relatives, friends and acquaintances of the teacher
4
I am a Data Analyst with a degree in Aerospace Engineering. Fabio provided me with excellent tutoring support in my search for international job opportunities, focusing on my sector and professional background. He guided me through interview preparation in English with clarity, precision, and effective strategies to highlight my strengths and experiences.
Fabio was the tutor who helped me prepare for my Physics 1 exam, which focused on kinematics and dynamics. He is highly knowledgeable and has a remarkable ability to break down complex concepts into clear, accessible explanations.
Mr. Bosio is a Mechanical Engineering tutor who supported me throughout my master’s degree. He guided me through several practical projects, offering clear explanations and effective strategies to approach them with confidence. Thanks to his support, I was able to strengthen my skills and achieve steady improvement.
He is highly knowledgeable, patient, and adaptable to the specific needs of each student. I would strongly recommend Mr. Bosio to anyone seeking professional, practical, and targeted support in Mechanical Engineering.
I had the pleasure of taking online lessons with Mr. Bosio to improve my understanding of thermodynamics, and it was a truly positive experience. His clear and straightforward explanations helped me grasp complex concepts that I had previously found difficult. Each lesson was tailored to my needs and included practical exercises that reinforced the theory.
Mr. Bosio was always available to answer my questions, guiding me step by step through problem-solving with patience and precision. This approach allowed me to make rapid progress and gain greater confidence in my studies.
I highly recommend Mr. Bosio to anyone looking for an online thermodynamics tutor: he is professional, knowledgeable, and able to make learning both engaging and effective. Thanks to his experience and his ability to adapt to the students’ needs, I was able to fully master the subject.View more recommendations
See more
Rates
Rate
- UGX 111,567
Pack prices
- 5h: UGX 557,836
- 10h: UGX 1,115,672
free lessons
The first free lesson with Fabio will allow you to get to know each other and clearly specify your needs for your next lessons.
- 30mins
online
- UGX 111,567/hr
Details
Session rates are tailored to each student’s education level and individual learning needs
Similar Engineering teachers in London
-
![]( "teacher_picture")
Mayank mnsb
Melbourne & Online- Ambassador
Iit alumnus | civil engg expert | structures/geotech/hydraulics/design | qut/uts/usyd/unsw | stat uni entry | fe global license | 10+ yrs | 1500+ students
- UGX 146,376/hr
- 1st lesson free
-
![]( "teacher_picture")
Shubham
London & Online- Ambassador
“from confusion to confidence” an inventor turned tutor with 11+ years of experience in teaching robotics, mechanical engg. & science (6-12 grade) | gate qualified | m.tech mechatronics (gold medalist
- UGX 278,918/hr
- 1st lesson free
-
![]( "teacher_picture")
Jose
London & Online- Ambassador
Phd mechanical engineer specialist in a-level physics and engineering lessons, including mechanics / thermo / fluids / electromag / dynamics
- UGX 195,243/hr
- 1st lesson free
-
![]( "teacher_picture")
Parham
Toronto & Online- Ambassador
Math, circuits, signals, dsp, electronics & more | 7+ years experience in teaching | master's in electrical and computer engineering from mcmaster university
- UGX 162,982/hr
- 1st lesson free
-
![]( "teacher_picture")
Dr․ joshua
Urbana & Online- Ambassador
9+ years of experience tutoring engineering (and other stem). video + transcript + detailed typeset notes provided after every session. bs mechanical engineering + phd in machine learning for robotics
- UGX 249,763/hr
- 1st lesson free
-
![]( "teacher_picture")
Mayank mnsb
London & Online- Ambassador
Civil engineering expert (bsc/msc) | iit master's | 11+ yrs exp | structures, geotechnics, concrete & steel design | curriculum support | ice/fe exam specialist
- UGX 223,134/hr
- 1st lesson free
-
![]( "teacher_picture")
Parham
New York & Online- Ambassador
Math, circuits, signals, electronics & more | master's graduate in electrical and computer engineering | 7+ years of experience in university teaching and tutoring
- UGX 187,323/hr
- 1st lesson free
-
![]( "teacher_picture")
Moe
Edmonton & Online- Ambassador
U of a phd student gives engineering mechanics, structural analysis, civil engineering lessons online.
- UGX 266,698/hr
- 1st lesson free
-
![]( "teacher_picture")
Dr chintan
Annerley & Online- Ambassador
Phd-qualified civil engineer with 10+ years of teaching experience offering practical, real-world application-based teaching in civil engineering subjects
- UGX 263,477/hr
-
![]( "teacher_picture")
Pedro
London & Online- Ambassador
Chartered structural engineer, 18+ years’ experience. online tutoring in structural analysis, design, and exam-focused worked examples.
- UGX 440,690/hr
- 1st lesson free
-
![]( "teacher_picture")
Waseem
Nottingham & Online- Ambassador
Lecturer with phd and 13 years teaching experience in the electrical and control engineering
- UGX 145,037/hr
- 1st lesson free
-
![]( "teacher_picture")
Ankur
Bengaluru & Online- Ambassador
Experienced tutor with phd offering interactive online lessons in mechanical and aerospace engineering modules.
- UGX 70,531/hr
- 1st lesson free
-
![]( "teacher_picture")
Kirollos
& Online- Ambassador
Empower your engineering skills! master engineering concepts with a professional! experienced multi-disciplinary engineer ("abet" accredited) provides lessons in software, robotics, electronics, and m
- UGX 195,243/hr
- 1st lesson free
-
![]( "teacher_picture")
Jose
Toronto & Online- Ambassador
Engineering classes with phd tutor, including dynamics / fluids / statics / mechanics / thermo, experienced and certified with 20 years experience
- UGX 148,166/hr
- 1st lesson free
-
![]( "teacher_picture")
Jayson
Toulouse & Online- Ambassador
Student in engineering school ready to help you in electronics, electrical engineering, electricity and it, soon to graduate with a bac + 5 and very passionate.
- UGX 187,134/hr
-
![]( "teacher_picture")
Hardik
Clayton & Online- Ambassador
Arduino, iot, basic electronics, and robotics tutoring. exclusively designed summer and holiday courses on electronics and robotics for kids and adults delivered in melbourne and online.
- UGX 117,101/hr
-
![]( "teacher_picture")
Subin
Thiruvananthapuram & Online- Ambassador
Senior mechanical engineering specialist & founder, sos international academy | 11 yrs exp | m.tech & phd researcher | thermodynamics, statics, dynamics, fluids & som
- UGX 88,164/hr
- 1st lesson free
-
![]( "teacher_picture")
Sevan
San Marcos & Online- Ambassador
Dr. sevan gonezen is an experienced university professor tutoring university level engineering courses in person and online
- UGX 328,855/hr
-
![]( "teacher_picture")
Davide
Roma & Online- Ambassador
Teaching assistant at the politecnico di milano offers private lessons in preparation for university entry tests, supportive lectures for university students of various faculties and high school stude
- UGX 327,485/hr
- 1st lesson free
-
![]( "teacher_picture")
Jalal
Vancouver & Online- Ambassador
14+ yrs of teaching electrical engineering courses; electromagnetics, electric circuits, signal and systems, etc. very efficient and quick wrap up for exam!
- UGX 174,836/hr
-
See Engineering tutors
